home *** CD-ROM | disk | FTP | other *** search
/ Utilities Professional 1-1500 / Utilities Professional 1-1500 (1994)(WPD)[!].iso / 12511500 / var1286.dms / var1286.adf / printers / Canon / CanonBJ300.doc < prev   
Text File  |  1992-09-02  |  2KB  |  71 lines

  1. This Disk contains a Printer Driver for use with the Canon BJ-
  2. 300/330 Bubble Jet Printer Series and Commodore Amiga Computers.
  3.  
  4. The driver is designed for use when the BJ-300/330 is configured
  5. for IBM Proprinter mode. ie SW1-1 and SW1-2 are set to on.
  6.  
  7. Contents
  8.  
  9. The following files are included on the disk:
  10.  
  11. Canon BJ300         -    Printer Driver revision 1.3
  12. Readme              -    This file
  13.  
  14.  
  15. Notes
  16.  
  17.      Setup and connect your BJ-300/330 as described in the BJ-
  18.      300/330 Users Manual.
  19.  
  20.      Set the printers DIP Switches SW1-1 and SW1-2 to the ON
  21.      position all other switches may be left at default or
  22.      customised appropriately.
  23.  
  24. General Printer Driver Information
  25.  
  26. 1.   Bubble Jet black/white and grey scale printer. 
  27.  
  28. 2.   The driver supports the following graphics dump densities.
  29.  
  30.      Density   X-DPI     Y-DPI     X*Y-DPI
  31.           1    360       360        129600
  32.           2    180       180         32400
  33.           3    120       360         43200
  34.           4    180       360         64800
  35.           5    240       360         86400
  36.           6    360       180         64800
  37.           7    360       360       1296000
  38.  
  39. 3.   A PaperSize of 'Wide Tractor' selects a maximum print width
  40.      of 13.6" this is applicable to the wide carriage BJ-330
  41.      printer only.
  42.  
  43. 4.   A PaperType of "Single" ejects a sheet with a Form Feed
  44.      after every print.
  45.  
  46. 5.   This driver automatically checks for the processor in use
  47.      and optimizes the print routines accordingly.  
  48.  
  49.  
  50. Hints and Tips
  51.  
  52. 1.   If using Pagestream 2.1 select density 0 to obtain 360x360
  53.      DPI resolution and not density 6.
  54.  
  55. 2.   If your output is striped or misses print lines then check
  56.      your printers DIP switch settings and software setup
  57.      values. Check especially page settings such as margins.
  58.  
  59. 3.   Data should only be sent to the printer either via
  60.      parallel.device (par:) or printer.device (prt:) and not
  61.      both together as this may confuse the printer.  
  62.  
  63.  
  64.  
  65. The driver is available via modem:
  66. WildCat
  67. FIDO 2:243/43
  68. ++49-6173-2544 (Germany)
  69. 1200-14400 bps HST/V32/V32.bis
  70. SETTING: 8N1
  71.